Load data for 30-30 Ackley Improved + .308 | 123gr | Prvi Partizan FMJ

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 123gr \| Prvi Partizan FMJ
Manufacturer SKU:	B-460
Bullet Weight:	123gr \| 8.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.929" \| 23.6mm
Caliber:	30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.447" \| 11.4mm
Shank Seated Depth:	0.447" \| 11.4mm
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B9135_C330
Last updated:	2025-12-08

Load data for 76 loads in caliber 30-30 Ackley Improved with .308 | 123gr | Prvi Partizan FMJ bullet and 38 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	86%	40857	88%	**72	100%
ADI AR 2219	<<locked>>	90%	41307	89%	**08	96%
Accurate 2015	<<locked>>	96%	41249	89%	**82	98%
[Accurate 2460]*	<<locked>>	94%	41292	89%	**75	93%
Accurate 2495	<<locked>>	96%	32735	71%	**10	96%
[Accurate 2520]*	<<locked>>	97%	36724	79%	**46	93%
Alliant AR-Comp 👍	<<locked>>	96%	36956	80%	**75	99%
Alliant Reloder-10x 👍	<<locked>>	92%	40640	88%	**92	99%
Alliant Reloder-7	<<locked>>	85%	41176	89%	**39	99%
Baschieri & Pellagri 106	<<locked>>	89%	41611	90%	**07	97%
[Hodgdon Benchmark]*	<<locked>>	95%	41321	89%	**30	93%
[Hodgdon CFE BLK]*	<<locked>>	85%	40857	88%	**77	91%
Hodgdon H322	<<locked>>	96%	41307	89%	**08	96%
Hodgdon H335	<<locked>>	90%	40611	87%	**92	95%
Hodgdon H4198	<<locked>>	86%	41075	89%	**00	96%
[IMR 3031]*	<<locked>>	96%	31792	68%	**57	94%
IMR 4198 👍	<<locked>>	91%	41597	90%	**66	99%
[Lovex D073.4]*	<<locked>>	92%	41539	89%	**66	93%
[Lovex D073.5]*	<<locked>>	94%	41292	89%	**75	93%
Norma 200 👍	<<locked>>	89%	40988	88%	**89	99%
[Norma 202]*	<<locked>>	97%	36361	78%	**16	94%
ReloadSwiss RS 14	<<locked>>	96%	28964	62%	**67	100%
[ReloadSwiss RS 40]*	<<locked>>	93%	41104	89%	**75	94%
Rottweil R 901	<<locked>>	97%	40205	87%	**59	95%
SNPE Vectan BA6 1/2	<<locked>>	83%	40756	88%	**46	100%
SNPE Vectan SP 10	<<locked>>	90%	40901	88%	**95	95%
SNPE Vectan Tubal 3000	<<locked>>	97%	40350	87%	**93	95%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	32227	69%	**43	93%
[Somchem S321]*	<<locked>>	95%	40770	88%	**89	92%
Somchem S335	<<locked>>	96%	37869	82%	**80	95%
Vihtavuori N120	<<locked>>	89%	40698	88%	**23	100%
Vihtavuori N130	<<locked>>	94%	41133	89%	**43	99%
Vihtavuori N133	<<locked>>	96%	35839	77%	**41	96%
[Vihtavuori N135]*	<<locked>>	96%	26614	57%	**80	92%
[Vihtavuori N140]*	<<locked>>	96%	33823	73%	**31	93%
[Vihtavuori N530]*	<<locked>>	96%	41742	90%	**95	92%
[Vihtavuori N540]*	<<locked>>	97%	33910	73%	**54	92%
[Winchester 748]*	<<locked>>	96%	41263	89%	**12	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	34432	74%	**54	100%
[ADI AR 2219]*	<<locked>>	81%	30632	66%	**75	92%
[Accurate 2015]*	<<locked>>	81%	25628	55%	**38	93%
[Accurate 2460]*	<<locked>>	89%	33982	73%	**34	90%
[Accurate 2495]*	<<locked>>	85%	22191	48%	**31	90%
[Accurate 2520]*	<<locked>>	92%	31256	67%	**21	90%
[Alliant AR-Comp]*	<<locked>>	81%	22902	49%	**95	93%
Alliant Reloder-10x	<<locked>>	81%	28311	61%	**29	95%
Alliant Reloder-7	<<locked>>	81%	35926	77%	**44	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31502	68%	**10	94%
[Hodgdon Benchmark]*	<<locked>>	90%	35317	76%	**11	90%
[Hodgdon CFE BLK]*	<<locked>>	82%	37782	81%	**15	90%
[Hodgdon H322]*	<<locked>>	83%	27659	60%	**93	90%
[Hodgdon H335]*	<<locked>>	81%	29791	64%	**52	90%
[Hodgdon H4198]*	<<locked>>	81%	35012	75%	**75	94%
[IMR 3031]*	<<locked>>	90%	26571	57%	**06	90%
IMR 4198	<<locked>>	81%	30821	66%	**39	97%
[Lovex D073.4]*	<<locked>>	87%	34200	74%	**28	90%
[Lovex D073.5]*	<<locked>>	89%	33982	73%	**34	90%
Norma 200	<<locked>>	81%	32184	69%	**08	98%
[Norma 202]*	<<locked>>	90%	29472	64%	**49	90%
ReloadSwiss RS 14	<<locked>>	93%	28007	60%	**44	100%
[ReloadSwiss RS 40]*	<<locked>>	86%	32329	70%	**92	90%
[Rottweil R 901]*	<<locked>>	87%	30168	65%	**39	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	38479	83%	**10	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	30690	66%	**75	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	29646	64%	**74	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	27586	59%	**24	90%
[Somchem S321]*	<<locked>>	91%	35723	77%	**87	90%
[Somchem S335]*	<<locked>>	85%	26745	58%	**28	90%
Vihtavuori N120	<<locked>>	81%	32547	70%	**79	100%
[Vihtavuori N130]*	<<locked>>	81%	27441	59%	**47	94%
[Vihtavuori N133]*	<<locked>>	82%	23409	50%	**26	90%
[Vihtavuori N135]*	<<locked>>	94%	24598	53%	**24	90%
[Vihtavuori N140]*	<<locked>>	91%	28819	62%	**06	90%
[Vihtavuori N530]*	<<locked>>	92%	36434	78%	**90	90%
[Vihtavuori N540]*	<<locked>>	93%	29950	65%	**52	90%
[Winchester 748]*	<<locked>>	92%	36042	78%	**07	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data